Latex Bra with Metal O-Rings

About this piece

❤️A structured latex bra with shaped cups, shoulder straps and metal O-rings at the centre and sides.

❤️Made from 100% natural latex — elastic, glossy, waterproof and durable.

❤️Standard 0.40mm for the best balance of fit and flexibility. 0.25mm to 1.00mm available on request.

❤️Fully handmade to your own measurements. Choose colour, zipper placement, collar style and hardware. Metallic colours add 20%.

❤️Care tips: rinse after use, wash with mild soap, air dry in the shade, store with a little talc in a cool dark place.

❤️Send us your measurements after ordering. Production takes 2 weeks, then free tracked shipping — USA 7 business days, Europe 10, Japan & Korea 7, elsewhere 10–15.

❤️Made to measure, so we cannot accept returns or exchanges. If a piece arrives defective, contact us within 48 hours for a remake or partial refund.

How measuring works

Nothing is cut until we have your numbers. After you order we send a measurement sheet — nine values for a full body piece, fewer for gloves, hoods and stockings. If you would rather check the maths yourself, our latex size calculator returns the finished measurements your garment should be cut to at each sheet thickness, and the measuring guide shows where the tape goes.

Latex sizing is not like fabric sizing

Natural latex has no woven threads to hold a shape, so a garment only hugs the body while it is stretched. Makers therefore cut the pattern below your body measurements — typically 12–15% reduction at 0.40mm — which is why a latex garment arrives measuring smaller than you are, and why two makers disagree about what "L" means. It is also why we ask for numbers rather than a letter size.

Care

Rinse after wearing, wash in lukewarm water with mild soap, dry in the shade, and store with a little talc in a cool dark place. Polished latex can be treated with silicone shiner. Avoid oil-based products, and keep it away from copper, brass and sunlight.